Key Hose – Dura-Flow Rubber Covered Attack Hose

Please call 1-800-544-6038 for Pricing

The lightweight, small diameter, rubber covered attack hose that packs a big punch. The heat and chemical resistant, nitrile/PVC through-the-weave design provides peak performance and maximum flow. With a test pressure of 600 psi and a range of temperature tolerance from -35 °F to 1200 °F, Dura‑Flow clearly outperforms conventional rubber covered attack lines.

A rugged, thick ribbed outer jacket construction makes the hose highly resistant to kink, impact, punctures, cuts and abrasion.

Ozone resistant, maintenance-free and no drying required, make Dura-Flow a reliable weapon in a firefighter’s arsenal. NFPA compliant and UL listed.


  • Lightweight, greater flexibility and virtually kink-free
  • Raised thick rib construction, resists cuts, punctures, impact and abrasion
  • Through-the-weave design for increased durability
  • Heat, chemical and ozone resistant
  • Easy to clean, easy to pack
  • 10-year warranty


Diameter Part No. Service Test Proof Test Burst Test Bowl Size Weight Uncoupled
1″ RC10-600 300 psi 600 psi 900 psi 1316 0.15 lbs/ft
1½” RC15-600 300 psi 600 psi 900 psi 11316 0.24 lbs/ft
*1¾” RC17-600 300 psi 600 psi 900 psi 11516 0.28 lbs/ft
2″ RC20-600 300 psi 600 psi 900 psi 2¼” 0.32 lbs/ft
*2½” RC25-600 300 psi 600 psi 900 psi 21316 0.48 lbs/ft

  • Dura-Flow is made from 100% high tenacity synthetic polyester yarn, circularly woven and completely protected by a through-the-weave extruded PVC/Nitrile rubber, forming a single homogeneous construction without the use of glues or adhesives of any type.
  • Dura-Flow is guaranteed to withstand 10,000 cycles on the Taber Abrasion Machine (H-22 Wheel: 0.5 kg) without exposing the liner.
  • Engineered to perform in any environment, Dura-Flow can withstand surface temperatures from 1200 ºF to -35 ºF
  • Dura-Flow coupling options are as required by purchaser, expansion ring threaded, Storz clamp ring, etc. Barcode recess available at additional charge.
  • The minimum burst test pressure when tested in accordance to NFPA 1961 on all Dura‑Flow diameters shall be 900 psi / 62 bar. Service test pressures stenciled on the hose shall be in accordance with current minimum requirements of NFPA 1962.
SKU: Dura Flow Category:


Nitrile/PVC through-the-weave rubber covered construction
UL Listed
NFPA compliant attack hose
Heat resistant
Chemical resistant
Maintenance free
Raised thick rib construction to aid abrasion resistance

Dowload PDF